DumaWall Shower Kit Installation
DumaWall Shower Enclosure Installation Video
Featuring Skip Bedell from "To Catch a Contractor"
Tools and supplies needed:
- Protective eye wear or safety goggles
- Heavy cloth or leather gloves
- Measuring tape
- Hand saw/circular saw
- 1-inch wood screws
- Adhesive (Loctite Power Grab Ultimate), finish nails or staples.
- Utility knife
- DumaWall Shower Kit
Read this entire installation guide before beginning your installation. ACP is not responsible and will not be held liable for project failures if installation guidelines are not followed.
DumaWall panels are not intended to be attached to raw concrete, poured concrete walls or concrete block basement walls. Appropriate substrates in a dry environment would include framed walls with existing tile, drywall, cement board, OSB, or plywood. ®. DumaWall panels must be attached to structures that comply with your local building codes and have incorporated appropriate moisture abatement measures.
In a wet environment, such as a tub or shower area, you can use Green board (water-resistant drywall), Hardiebacker®, Tile backer board, Cement board, Go Board, Kerdiboard®, Durock®, DensSheild®, Fiberock®, Permabase®, Wonder board®, and Schluter®.